Project: Meridian faux-chainmail bracelet tutorial

 

While I love doing some real chainmail, linking each little ring into several others, it can be tricky for the beginner, especially doing the first few rows while keeping all those jumprings in place. Well the other day I saw a chain which appeared to be European 4-1, but on second look was actually much simpler. I went home, recreated the technique and designed my own bracelet, adding large jumprings and an art glass hoop. The result was this bracelet, called Meridian. This super-easy wire bracelet requires only simple wire bending and minimal jumpring opening to achieve the sophisticated look of chainmail without all the fumbling! 

You will need: 18 gauge round wire, 28 or so 8mm 18 gauge round jumprings, 5 5.5mm jumprings, 2 16mm 14 gauge jumprings, 1 lobster clasp and 1 small Halo Heaven ring (from Unicorne Beads or Sonoran Beads). Tool list: round nose pliers, 2 pairs flatnose pliers, cutters, ruler.

 

Step 1: Cut 27 pieces of  18 gauge wire, appr. 1 1/4 inches long. This will make enough figure-8 links to make a bracelet for a 7 inch wrist. Grasp the tip of the wire with roundnose pliers. and make a loop on one end.

 

 Make a loop going the opposite direction on the other end, making a figure 8 shape. 

 

                                                           Repeat for all the wire pieces.

 

Step 2: Open an 8mm jumpring and place two figure-8 links inside. Close the jumpring.

  

Step 3: Open another 8mm jumpring, insert inside ONE of the pair on the previous jumpring, and place another figure-8 link on the new jumpring. Close. 

Step 4: Open another 8mm jumpring, insert into the previous figure-8 link, and place another figure-8 link on the new jumpring. Repeat step 4 for a total of 13 figure-8 links.

 

Step 5: Open a 16mm jumpring. Insert into the latest figure-8 link, and add the glass hoop. Close the jumpring. Open the second 16mm jumpring, insert a figure-8 link, and close.  Repeat step 4 for the remaining figure-8 links, and end with an 8mm jumpring.

 

Step 6: Open two 5.5mm jumprings and connect the two 16mm jumprings with each. Close.

Step 7: Open a 5.5mm jumpring and connect the lobster clasp to one end of the bracelet. Close.

Step 8: Open two 5.5mm jumprings, and connect the last 8mm jumpring to the other end of the bracelet. Close.

Congratulations, your bracelet is finished!

Some fun variations include using a crystal, resin or metal hoop instead of glass, using more than one, and embellishing the faux-chainmail base edge with more jumprings, perhaps even combining it with real chainmail!

Tutorial Thursday: Scooplets

Thanks to BeadOrigami's awesome Bubble Beaded Beads tutorial, I've been on a beaded bead roll these past few months! After a few bubble beads and variations thereof, I moved on to a basic embellished 'plum blossom' design, adapting the widely-used pattern with strategic bead placement/substitution, and a lot of experimentation. I now have a heap of them, and call them Scooplets, because they look just like tiny scoops of ice cream! I wear them individually on a simple cord or silk ribbon, or incorporate them into jewelry, as in my black and gold Final Mystery necklace.You can get tutorials on the Bubble Beaded Bead from BeadOrigami, 1BeadWeaveror a number of the sources linked above.

Each of these beads is the exact same basic pattern, varying only in the type of beads selected, and the amount/placement of embellishment. For example, in the gold and black necklace, I stitched the bead in the basic pattern, in 3mm beads, embellishing each hole except on each end.

The second pearl, gold and red necklace, I used pearls and increased the gold bead count to accomodate the longer pearls.

Continuing down clockwise, I used 3mm beads and long teardrops in the orange bead.

The aqua bubbly bead used 4mm beads and fringe seed beads, plus some silver 11/o embellishments.

The next bead uses 6x4mm crystal rondelles in the main body, and 4mm firepolish at each end. A silk ribbon was strung with a teardrop dangle, then both ribbon ends were strung through the scooplet, hanging the scooplet vertically.

The last bead uses 4mm and 3mm beads, the 4mm beads used along the 'equator' of the bead, creating a saucer shape, rather than a round.